Min Maxing Meets Vaping

Looking for a vape you can trust and hit 2G cartridges from? The Wulf Micro Max Cartridge Vaporizer has your back thanks to its featured ability of accommodating cartridges up to 16mm in size and 2 grams in capacity! All of this is powered by a 650mAh USB-C rechargeable battery (cable included) that offers you the choice of 4 different preprogrammed temperature settings (2.7, 3.2, 3.7, and 4.2v) to make sure your Micro Max is hitting hard no matter the cartridge.

Additionally the Micro Max comes with a preheat functionality to help give your cartridge that extra punch by slowly warming your oil before your hit. To complete the package the Micro Max comes ready with 2 magnetic 510 threaded adapters to ensure your device works perfectly with as many different cartridge brands as possible. Take your cartridges to the next level by investing in a proper vaporizer for them by picking up a Micro Max today.

Loading the Micro Max

To get started with your Micro Max Cartridge Vaporizer you must take one of your 2 included magnetic rings and gently screw it onto the 510 threaded connection of your cartridge. This allows for your cartridge and the Micro Max to be magnetically secured for safe usage while also letting you swap carts in on the fly.

Once the ring adapter is connected to your cart, gently place the magnetic bottom into the Micro Max chamber and listen for a satisfying *clicking* noise to indicate it’s properly attached. The device and your cartridge are now magnetically linked for your safety and your Micro Max is ready to start ripping.

Using Your Micro Max

Now that your cartridge is connected you are ready to turn on your Micro Max by pressing the power button rapidly 5 times. Now when you hold down the power button and inhale from your cartridge you will be greeted by your first premium hit from the Micro Max and have thus begun your adventures with your new vaporizer.

When your session is ready for a close or pause, simply press the power button 5 times in succession and it will power down. Make sure to power down your Micro Max whenever you are not using it or planning to bring it on the go.

Adjusting Your Temperature

The Micro Max comes equipped with 4 pre-programmed voltage settings to give you an easy way to swap between a range of temperatures. In order to change your temperature level simply press the power button three times in a row and watch as the power button’s internal LED light changes colors to inform you which power level you're now at. The colors and ranges go from 2.7 - Green, 3.2 - Blue, 3.7 - Yellow, and 4.2 - Red in order to give you a visual cue as to what voltage you are currently at. Experiment with different voltage settings with each of your individual cartridges in order to find their own unique optimal temperatures!

Pre-Heating Your Micro Max

In order to activate the Micro Max’s preheat functionality simply press the power button 2 times in quick succession while the vaporizer is currently powered on. This will start the LED light cycling between all of the colors for the duration of its 15 second preheating cycle. Once the light stops, you are good to press the power button down and inhale from your cartridge in order to take a super charged hit with ease. In order to cease the preheat cycle while it is currently running simply press the power button 1 time and it will pause.

How to Charge

When you first receive the Micro Max make sure to charge it for 2 full hours before use. Every other time after the first, only charge your device for 1 hour maximum as anything exceeding that can cause damage to your battery.

While your Micro Max is successfully charging you will notice its LED turns red in color. When this same LED turns to a “green” color, that’s when you know that your Micro Max is finished charging and is all ready to go.

Only ever use the USB-C charging cable that came included with your Micro Max and never attempt to charge it with third party accessories as this can lead to dangerous battery issues.

Troubleshooting

The Micro Max comes equipped with several troubleshooting warning indicators that you should be aware of as you journey around with your new vaporizer.

First off if your LED goes white and flashes 3x, then your Micro Max is indicating its short circuiting and will go to standby. Do not use your Micro Max if it is displaying a short circuit warning and place it upright in a safe uncluttered area until it ceases.

Should you inhale from your Micro Max for more than 10 seconds the unit will stop working and the LED will flash 5x to let you know you’ve gone overtime. This limiter is in place to ensure your vape never accidentally overheats or brings itself to the point of combustion.

If you notice your Micro Max is flashing a red light 10x and stops working, this means that your battery is dead and you need to charge it to keep vaping.

How to Clean Your Micro Max

Thanks to its removable magnetic ring the Micro Max is incredibly easy to clean and keep gunk free. In order to properly clean your unit simply make sure it is powered off, remove the magnetic ring and cartridge, and then proceed to use a q-tip lightly soaked in isopropyl alcohol to disinfect the connection while removing any build up. After cleaning make sure to wipe down your Micro Max and give it ample time to dry before reconnecting your cartridge and magnetic ring. For the body, we recommend using an anti bacterial wipe every so often to ensure your vape is as clean as possible.

What’s Included:

• (1) Wulf Micro Max
• (2) Magnetic Rings
• (1) USB-C Cable
• (1) User Manual

WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge or use any other charging cable other than what comes with your battery. Failure to follow these instructions could result in battery damage and frying of the internal system.